Maintaining a clean and shining bathroom does not have to be a daunting job, and you do not always have to depend on costly cleaning solutions to keep filth and grime at bay; there are several less tapware expensive and natural options available in the kitchen cabinet. Adhere to our bathroom cleaning recommendations and you’ll soon have sparkling results.
We realize how difficult it may be to maintain the appearance of your new bathroom, and most of us dislike cleaning. As a result, we’ve developed this handy tapware cleaning and maintenance guide to help you keep your bathroom looking beautiful for years to come.
It is essential to clean all bathroom items on a regular basis to avoid the accumulation of limescale, filth, and grime.
If you’ve just moved into a new home, you may have seen tiny patches of rust at the foot of the bath; these were likely caused by tapware iron deposits from the new water supply piping. Remove the stains with a mild cleanser; they should not return unless the water source stays polluted. Visit https://tileandbathco.com.au/collections/tapware to buy tapware Melbourne.
Limescale may be removed using a moderate lemon juice solution or a 50:50 vinegar and water solution. Allow the vinegar and water solution to sit for about 5 minutes before rinsing with warm water.
Ventilation in bathrooms
It is critical to air your bathroom, either by opening a window or installing an extractor fan, to help prevent mold growth in your tapware.
While all of our tapware furniture is made of materials that are suitable for use in a bathroom, to minimize the chance of damage, place it away from the bath or shower to prevent splashes of water and soap residue. If you are splattered with water, quickly dry.
Pressure of water
Excessive water pressure may cause damage to plumbing fittings. High water pressure is often caused by trapped air in the pipes; this air may be removed by running the taps for a few minutes. If you’ve just relocated to a new location, the water pressure may seem greater than you’re accustomed to.
Baths made of steel
Steel baths or tapware should be cleaned regularly with warm soapy water, washed with clean water, then dried and polished with a soft cloth as needed.
Regularly cleaning your steel bath or tapware will help avoid the accumulation of limescale. Certain proprietary cleansers may cause harm to the enameled surface; therefore we highly advise you to follow the manufacturer’s recommendations.
Avoid using bleach as it may damage the shiny finish. Strong disinfectants should be used cautiously and always diluted.
Baths made of acrylic
Acrylic bathtubs or tapware should be cleaned with warm soapy water on a regular basis. In an ideal world, an acrylic bath would be cleaned promptly after each use, washed with cold water, and dried with a soft towel if necessary.
Due to the softer nature of acrylic compared to ceramic and porcelain enamel, avoid harsh cleaning solutions and scouring powders to avoid damaging the surface.
All contact with household chemicals should be avoided, including paint strippers, hair colors, carpet dyes, powerful disinfectants, alcohol, perfume, aftershave, bleach, nail polish, and nail polish remover. Certain soaps and shampoos may even discolor the acrylic if they are allowed to pool on the surface undiluted.
Enclosures de douche
Shower tapware enclosures should be cleaned thoroughly after each use to avoid the accumulation of dirt and limescale. We strongly suggest wiping away water droplets with a squeegee or a soft cloth, but not with harsh cleaning solutions. Shower gel and shampoo may also accumulate, so thoroughly rinse them away with water. Don’t forget to clean the sliding door track fittings to ensure that they continue to operate smoothly.
Trays de douche
Maintaining your shower tray is simple; just clean with warm soapy water or a light detergent and wipe dry with a soft towel after each use. Never use abrasive cleaners on the surface, since they may leave a mark. If the shower tray’s surface or tapware has fine scratches, T-cut may be applied and rubbed away with a wet cloth. Additionally, the waste trap should be cleaned on a regular basis, particularly if the shower is used daily.
Toilet seats made of plastic
Regularly clean plastic toilet seats with warm soapy water. Avoid using abrasive cleaners or scouring powders, since they may cause harm to the tapware surface.
Materials used in bathrooms
The bathroom is constructed from a mix of materials, including glass, ceramic, and chrome. Adhere to our recommendations for maintaining and cleaning a variety of materials.
Regular cleaning of ceramic bathroom items such as the basin and toilet with warm soapy water, followed by rinsing with clean water and, if necessary, drying and polishing with a soft cloth. Regular cleaning avoids the accumulation of limescale and dirt and grime.
We suggest that before using a proprietary cleaning on ceramic, you read the directions on the bottle carefully, since some may cause harm to the glazed surface. Additionally, avoid keeping harsh cleansers like bleach overnight in ceramic items to avoid harming the surface.
Avoid allowing limescale to build up if you reside in a hard water region; if it does, it may be more difficult to remove. To remove limescale, use a 50:50 solution of vinegar and water, but ensure that all vinegar is fully washed away. Additionally, you may remove limescale with a weak lemon juice solution. Always avoid using harsh detergents or cleaning chemicals, and never use abrasive materials. If you’re going to use a cleaning agent, choose one with a PH value of between PH4 and PH8.
Regular cleaning helps to preserve the look of stainless-steel tapware and also helps prevent corrosion and maintain sanitary conditions. Simply use warm soapy water or a mild detergent to clean stainless steel, then rinse and dry with a soft towel. Avoid the use of caustic acids or disinfectants. If a build-up of dirt occurs, a specialized stainless-steel cleaning may be utilized.
Always follow the manufacturer’s recommendations when using a proprietary cleaning. Steel wool or steel wool soap pads should never be used since they may leave rust stains.